AR-100 is an exceptionally high gloss, self-leveling epoxy coating, that is supplied as a 2 Parts A and 1 Part B by volume system. AR-100 has a long work time of 65 minutes which allows for extended work time to apply product. AR -100 is 100% solids (zero VOC) without the use of extenders or plasticizers enhancing durability and chemical resistance. Can be used on concrete floors, countertops and other decorative surfaces. When used on concrete floors it is recommended to be applied over either a MVB or VRM primer. May be used as a pigmented topcoat with American Resins pigment packs or as a clear resulting in high gloss pigmented coatings or water white clear coats.

AR- MVB is a two component vapor barrier coating. AR MVB is used as a primer and provides better adhesion. AR MVB will control moisture vapor emission rates up to 25 lb. /24 hr. /1000 square feet all while providing excellent physical and chemical resistance. This coating meets LED standards.

AR – MVB Ultra Rapid is a two component vapor barrier coating designed to be a faster version of our standard AR – MVB & our AR-MVB FC. AR – MVB Ultra Rapid is used as a primer as well as a binder resin for Flake. AR-MVB Ultra Rapid will control moisture vapor emission rates up to 25 lb./24 hr./1000 square feet all while providing excellent physical and chemical resistance. This coating meets LEED standards.

Epoxy coating designed for fast cure priming applications with a recoat time ranging between 3-4 hours. It yields a seamless glossy finish, and a high covering power.

100% solid moisture vapor barrier epoxy coating designed for controlling the moisture vapor emission rate on deteriorated or new floors.

Fast Cure 100% solid moisture vapor barrier epoxy coating designed for controlling the moisture vapor emission rate on deteriorated or new floors.

Epoxy membrane designed to protect substrates against water infiltration which exhibits high elongation and a high resistance to tearing.

Epoxy casting system used for mass castings with thicknesses greater than 1 inch. Designed for casting, potting and embedding applications.

Epoxy crack filler, system designed to repair and fill vertical or horizontal cracks. It has excellent adhesion to concrete, masonry, wood, metal and plastics.

Low viscosity epoxy primer coating system allowing for superior penetration in concrete substrates. Can also be used as a finish coat under circumstances where a longer pot life is required.